|By Don MacVittie||
|November 17, 2012 09:00 AM EST||
We’re having all of our sidewalks redone right this instant. In fact, I’ll include a picture of the “pavers” – which is the fancy new word for the stones used to build the sidewalk. If the construction and design team do something wrong, it will cost them a pretty penny to come back out, rip up the pavers (and the columns or knee wall they’re putting in with the pavers on the patio), and move things around or replace pavers to make it right. We hired a great company that has done good work for us in the past, so I’m not terribly worried about this possibility. It happens in construction, but happens a lot less with a reputable installer.
It does offer a solid introduction to Field Programmable Gate Arrays (FPGAs) though. Because before there were FPGAs, most hardware out there shipped with a well-defined, non-changeable logic path. It did what it did, and if the hardware designers made a mistake in this increasingly complex product, you were stuck with the results. Some EEPROMs were shipped with re-programmability, but the vast majority of hardware did not have any way to update it. If a bug appeared, you lived with it or the vendor took the very expensive step of replacing it. Much like what happens when pavers are installed incorrectly. The difference of course is that you can look at pavers and see if you think the work is right, while hardware needs to be run – and run a lot – before weaknesses show. Kind of like the case where pavers are laid down but the material underneath them is not properly prepared. The next spring you can expect a jungle to grow up between the pavers, but until then they look nice.
EEPROMs (Electrically Erasable Programmable Read Only Memory) and then FPGAs brought the ability to fix bugs in the field into the realm of hardware. As FPGAs progressed and became more complex, even real-time updating (as in on-the-fly) became a possibility. At this point, there are billions of gates on an FPGA, and they’re used in a wide variety of devices. If you’ve ever “Flashed the ROM” or “Updated Firmware” there is a good chance you’ve been updating the FPGA in the device (though of course, these terms are vague enough that it could be other things you’re updating too).
But the power of updating on-the-fly is huge. If for nothing else than prototyping and training. Need to teach people hardware design? How better than on a device that you can program, test, reprogram, test again… Indeed, for at-home use (having nothing to do with F5, just one of my many geek toys), I use an Actel FPGA to set up complex circuits. Actel is now MicroSemi, but I haven’t dealt with them since the change, so I don’t know any details there. But for designing circuits, you can’t beat it. I’ve abused mine, and it still does what I tell it to. Note I said “what I tell it to”, not “what I expect it to”… I’m not a professional at FPGA programming, but it is a lot of fun.
But in a professional setting, the power is even greater. Not only can you train staff in FPGA programming and prototype solutions with FPGAs, you can also ship with FPGAs installed. Having FPGAs installed means that a huge percentage of the logic that makes a device go can be updated as-needed. This helps the vendor by giving them a path to fixing logic errors that were not discovered before ship time (say because the error is not obvious until the device is under massive load for a long period of time). It helps the customer by giving them an obsolescent-resistant product. If the logic of the hardware can be updated, then the device is much more forward-compatible than those that are not. When an FPGA can have 500,000 to millions of logic elements on it, the level of re-programmability becomes amazing. No support for the newest standard that impacts your device? Download the update, and BAM! You’ve got support for a standard that might not have even existed when your device was originally designed.
This does of course come with some risks. A part of your system that was stable forever now has changes introduced to it dynamically, but most reputable vendors have tools/steps/security in place to protect their customers from hardware problems bringing down the entire system. I can’t speak for everyone, in fact, at this instant I can’t even authoritatively speak for F5, but this next week I’ll be talking to the hardware folks about what we do, and the next two installments in this blog will cover both what we do with FPGAs, and how we protect our customers.
SYS-CON Events announced today that BMC will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. BMC delivers software solutions that help IT transform digital enterprises for the ultimate competitive business advantage. BMC has worked with thousands of leading companies to create and deliver powerful IT management services. From mainframe to cloud to mobile, BMC pairs high-speed digital innovation with robust IT industrialization – allowing customers to provide amazing user experiences with optimized IT per...
May. 27, 2015 11:30 AM EDT Reads: 443
As the Internet of Things unfolds, mobile and wearable devices are blurring the line between physical and digital, integrating ever more closely with our interests, our routines, our daily lives. Contextual computing and smart, sensor-equipped spaces bring the potential to walk through a world that recognizes us and responds accordingly. We become continuous transmitters and receivers of data. In his session at @ThingsExpo, Andrew Bolwell, Director of Innovation for HP's Printing and Personal Systems Group, discussed how key attributes of mobile technology – touch input, sensors, social, and ...
May. 27, 2015 11:30 AM EDT Reads: 4,265
All major researchers estimate there will be tens of billions devices - computers, smartphones, tablets, and sensors - connected to the Internet by 2020. This number will continue to grow at a rapid pace for the next several decades. With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo, June 9-11, 2015, at the Javits Center in New York City. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be
May. 27, 2015 11:15 AM EDT Reads: 2,770
The Internet of Things is not only adding billions of sensors and billions of terabytes to the Internet. It is also forcing a fundamental change in the way we envision Information Technology. For the first time, more data is being created by devices at the edge of the Internet rather than from centralized systems. What does this mean for today's IT professional? In this Power Panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists will addresses this very serious issue of profound change in the industry.
May. 27, 2015 10:30 AM EDT Reads: 1,299
WebRTC defines no default signaling protocol, causing fragmentation between WebRTC silos. SIP and XMPP provide possibilities, but come with considerable complexity and are not designed for use in a web environment. In his session at @ThingsExpo, Matthew Hodgson, technical co-founder of the Matrix.org, discussed how Matrix is a new non-profit Open Source Project that defines both a new HTTP-based standard for VoIP & IM signaling and provides reference implementations.
May. 27, 2015 10:30 AM EDT Reads: 5,469
Buzzword alert: Microservices and IoT at a DevOps conference? What could possibly go wrong? In this Power Panel at DevOps Summit, moderated by Jason Bloomberg, the leading expert on architecting agility for the enterprise and president of Intellyx, panelists will peel away the buzz and discuss the important architectural principles behind implementing IoT solutions for the enterprise. As remote IoT devices and sensors become increasingly intelligent, they become part of our distributed cloud environment, and we must architect and code accordingly. At the very least, you'll have no problem fil...
May. 27, 2015 10:00 AM EDT Reads: 2,241
"People are a lot more knowledgeable about APIs now. There are two types of people who work with APIs - IT people who want to use APIs for something internal and the product managers who want to do something outside APIs for people to connect to them," explained Roberto Medrano, Executive Vice President at SOA Software, in this SYS-CON.tv interview at Cloud Expo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
May. 27, 2015 09:30 AM EDT Reads: 4,615
Almost everyone sees the potential of Internet of Things but how can businesses truly unlock that potential. The key will be in the ability to discover business insight in the midst of an ocean of Big Data generated from billions of embedded devices via Systems of Discover. Businesses will also need to ensure that they can sustain that insight by leveraging the cloud for global reach, scale and elasticity.
May. 27, 2015 09:30 AM EDT Reads: 7,123
In their session at @ThingsExpo, Shyam Varan Nath, Principal Architect at GE, and Ibrahim Gokcen, who leads GE's advanced IoT analytics, focused on the Internet of Things / Industrial Internet and how to make it operational for business end-users. Learn about the challenges posed by machine and sensor data and how to marry it with enterprise data. They also discussed the tips and tricks to provide the Industrial Internet as an end-user consumable service using Big Data Analytics and Industrial Cloud.
May. 27, 2015 07:30 AM EDT Reads: 5,731
Building low-cost wearable devices can enhance the quality of our lives. In his session at Internet of @ThingsExpo, Sai Yamanoor, Embedded Software Engineer at Altschool, provided an example of putting together a small keychain within a $50 budget that educates the user about the air quality in their surroundings. He also provided examples such as building a wearable device that provides transit or recreational information. He then reviewed the resources available to build wearable devices at home including open source hardware, the raw materials required and the options available to power s...
May. 27, 2015 04:30 AM EDT Reads: 4,328
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happens, where data lives and where the interface lies. For instance, it's a mix of architectural styles ...
May. 27, 2015 03:00 AM EDT Reads: 6,004
We certainly live in interesting technological times. And no more interesting than the current competing IoT standards for connectivity. Various standards bodies, approaches, and ecosystems are vying for mindshare and positioning for a competitive edge. It is clear that when the dust settles, we will have new protocols, evolved protocols, that will change the way we interact with devices and infrastructure. We will also have evolved web protocols, like HTTP/2, that will be changing the very core of our infrastructures. At the same time, we have old approaches made new again like micro-services...
May. 27, 2015 02:30 AM EDT Reads: 5,668
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective storage designed to handle the massive surge in back-end data in a world where timely analytics is e...
May. 27, 2015 02:00 AM EDT Reads: 6,417
Collecting data in the field and configuring multitudes of unique devices is a time-consuming, labor-intensive process that can stretch IT resources. Horan & Bird [H&B], Australia’s fifth-largest Solar Panel Installer, wanted to automate sensor data collection and monitoring from its solar panels and integrate the data with its business and marketing systems. After data was collected and structured, two major areas needed to be addressed: improving developer workflows and extending access to a business application to multiple users (multi-tenancy). Docker, a container technology, was used to ...
May. 27, 2015 01:00 AM EDT Reads: 2,623
The true value of the Internet of Things (IoT) lies not just in the data, but through the services that protect the data, perform the analysis and present findings in a usable way. With many IoT elements rooted in traditional IT components, Big Data and IoT isn’t just a play for enterprise. In fact, the IoT presents SMBs with the prospect of launching entirely new activities and exploring innovative areas. CompTIA research identifies several areas where IoT is expected to have the greatest impact.
May. 26, 2015 09:00 PM EDT Reads: 5,280
The Industrial Internet revolution is now underway, enabled by connected machines and billions of devices that communicate and collaborate. The massive amounts of Big Data requiring real-time analysis is flooding legacy IT systems and giving way to cloud environments that can handle the unpredictable workloads. Yet many barriers remain until we can fully realize the opportunities and benefits from the convergence of machines and devices with Big Data and the cloud, including interoperability, data security and privacy.
May. 26, 2015 05:00 PM EDT Reads: 5,012
The Internet of Things is tied together with a thin strand that is known as time. Coincidentally, at the core of nearly all data analytics is a timestamp. When working with time series data there are a few core principles that everyone should consider, especially across datasets where time is the common boundary. In his session at Internet of @ThingsExpo, Jim Scott, Director of Enterprise Strategy & Architecture at MapR Technologies, discussed single-value, geo-spatial, and log time series data. By focusing on enterprise applications and the data center, he will use OpenTSDB as an example t...
May. 26, 2015 02:00 PM EDT Reads: 6,749
Scott Jenson leads a project called The Physical Web within the Chrome team at Google. Project members are working to take the scalability and openness of the web and use it to talk to the exponentially exploding range of smart devices. Nearly every company today working on the IoT comes up with the same basic solution: use my server and you'll be fine. But if we really believe there will be trillions of these devices, that just can't scale. We need a system that is open a scalable and by using the URL as a basic building block, we open this up and get the same resilience that the web enjoys.
May. 26, 2015 01:00 PM EDT Reads: 7,360
We are reaching the end of the beginning with WebRTC, and real systems using this technology have begun to appear. One challenge that faces every WebRTC deployment (in some form or another) is identity management. For example, if you have an existing service – possibly built on a variety of different PaaS/SaaS offerings – and you want to add real-time communications you are faced with a challenge relating to user management, authentication, authorization, and validation. Service providers will want to use their existing identities, but these will have credentials already that are (hopefully) i...
May. 26, 2015 01:00 PM EDT Reads: 4,655
Container frameworks, such as Docker, provide a variety of benefits, including density of deployment across infrastructure, convenience for application developers to push updates with low operational hand-holding, and a fairly well-defined deployment workflow that can be orchestrated. Container frameworks also enable a DevOps approach to application development by cleanly separating concerns between operations and development teams. But running multi-container, multi-server apps with containers is very hard. You have to learn five new and different technologies and best practices (libswarm, sy...
May. 26, 2015 12:00 PM EDT Reads: 2,528