|By Don MacVittie||
|November 26, 2012 08:00 AM EST||
I was talking with the team working on our yard – they’re putting in new sidewalks and a patio, amongst other things – and we got on the subject of gutters. When we bought this house, it came with no gutters, and that has, over time, caused some serious damage to the base of the house. Wood and plaster do not take it well when water pours down on them at the rate that, oh, say melting snow in the spring sends it down. So I had them get us an estimate for gutters on the entire house. Some of the work they’re estimating is running the gutters right to the storm drain, which is not normally cheap, but they had both the front and back yards all ripped up, so it is a good time to do it, both cheaper and less messy, since the mess is already there.
So I told them to do it, because I don’t want the sod they’re going to lay to be ripped up in a year when we decide to put the gutters on, and certainly don’t want them to rip up the patio and sidewalks they’re putting in now just to lay pipe later – that would be nearly impossible.
And that, in a nutshell, is the same reason why FPGAs are used in a lot of high-tech firms. If the device is my yard/sidewalks, and I have to choose between a custom ASIC versus an FPGA, the custom ASIC would require me to rip up the yard later, while the FPGA is planning ahead for change.
Let me explain. With an FPGA, the circuits are programmed. Not like software, but code sets up the circuits, and then they are pretty equivalent to having them be hard-wired. With an ASIC, they really are hard-wired. So six months later, a change to the system – be it added functionality or fixes to existing logic – will be far easier with an FPGA than an ASIC. With an FPGA, the design file is opened, the changes made and tested, then the config is compiled and delivered to manufacturing. At that point, the devices produced with the new config file will have the new functionality. With ASICs, you change the design, send it to a manufacturing shop, wait for the shop to produce a small run (working it into their schedule that is), test the result, and then do a full production run. Then the new ASIC has to be put on the assembly line to replace the old ASIC. The difference is astronomical in terms of time required and even more so in terms of cost.
Of course there are some trade-offs. Every architectural choice results in trade-offs, and anyone who tells you differently is indeed trying to sell you something, and they don’t want to admit the trade-offs used to produce what they’re selling.
One of the big concerns out there about FPGAs is that they’re less secure. In the most vague, general sense, this is true. But in practical use scenarios, it most certainly isn’t. Here are the concerns, and why they’re over-rated (note that these notes are adapted from responses to my questions put to Clint Harames of F5<’s most excellent FPGA team, I cannot vouch for other production except to say the other teams I was involved with outside of F5 were similar):
- It’s field programmable! What if it gets modified? In F5’s case, none of the programmability is accessible from the outside. There is no Ethernet or coding hack that can reprogram it, because that functionality is not accessible. Other vendors work to a differing standard, so definitely worth checking, though I would remind you that it is almost never going to be as easy to hack an FPGA as it is to hack software or COTS hardware.
- Okay, but can’t it be erased and destroy the device? In theory yes (though erasing it is only effective until the next boot – non-destructive, so-to-speak), but if “modify” functionality is not accessible, then it can’t be erased easily. The caveat is that there is of course a reset pin on the chip, but if the ne’er-do-well has physical access to your device, time to disassemble the device, and a handy pinout for the FPGA chip you’re using, I’m going to guess you have bigger problems than whether they can reset your FPGA.
- If it’s programmable, can’t the program be read out and modified? Again, that functionality can be enabled on the chip, and you can check with your device manufacturer to see if they leave it enabled for production devices. Remember, it is a twofold story here, in F5’s case, we don’t generally want to reprogram production devices and don’t want to make reverse engineering our product any easier than it has to be, while we want to protect you from someone modifying a production device. So when the design is done and meets all test criteria, we at F5 turn access to this functionality off completely before shipping product is produced. Definitely worth checking with your vendor to find out what they are doing.
Again, your vendor may do things differently, if, for some reason they need the ability to reprogram the FPGA in your device.
For you, the IT staffer, the benefits are pretty straight-forward. The device you purchase will be closer to “up to date” because of the time-to-market benefits of FPGAs, it will be cheaper because of the reduced up-front costs (note that like everything involving costs, economies of scale can change the “cheaper” part to be untrue, depending upon the costs involved), and the resulting device will be far, far faster than the equivalent processing done on a general purpose CPU. In the end, it is hardware doing the processing, and FPGAs have concurrency that general purpose CPUs can only match with a huge number of cores, even then since the OS handles the scheduling on a general purpose CPU, many cores does not normally make up the performance difference.
There are some who think the advent of virtualization and virtualized appliances should curb the use of FPGAs, as the virtual version has to include all the functionality. While this is, on the surface, a reasonable argument, it has a flaw. FPGAs are MUCH faster than software will ever be, let alone a VM running on a host with who-knows-how-many other VMs sharing its resources. So in cases like F5, where there is a hardware and a software version, the key is to be able to run in both. TMOS, F5’s OS for traffic management, uses hardware if available, software if not. This offers the best of both worlds – acceptable traffic management in a VM, and high-performance traffic management in hardware.
Next time I’ll delve into specific functionality that on our hardware platforms is implemented in FPGA, and how that helps you do your job in IT, today was more of a “what are the risks, what are the benefits” in a generic sense.
SYS-CON Events announced today that BMC will exhibit at SYS-CON's 16th International Cloud Expo®, which will take place on June 9-11, 2015, at the Javits Center in New York City, NY. BMC delivers software solutions that help IT transform digital enterprises for the ultimate competitive business advantage. BMC has worked with thousands of leading companies to create and deliver powerful IT management services. From mainframe to cloud to mobile, BMC pairs high-speed digital innovation with robust IT industrialization – allowing customers to provide amazing user experiences with optimized IT per...
May. 29, 2015 12:15 PM EDT Reads: 1,540
Imagine a world where targeting, attribution, and analytics are just as intrinsic to the physical world as they currently are to display advertising. Advances in technologies and changes in consumer behavior have opened the door to a whole new category of personalized marketing experience based on direct interactions with products. The products themselves now have a voice. What will they say? Who will control it? And what does it take for brands to win in this new world? In his session at @ThingsExpo, Zack Bennett, Vice President of Customer Success at EVRYTHNG, will answer these questions a...
May. 29, 2015 12:13 PM EDT Reads: 108
The 4th International Internet of @ThingsExpo, co-located with the 17th International Cloud Expo - to be held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA - announces that its Call for Papers is open. The Internet of Things (IoT) is the biggest idea since the creation of the Worldwide Web more than 20 years ago.
May. 29, 2015 12:00 PM EDT Reads: 2,618
An entirely new security model is needed for the Internet of Things, or is it? Can we save some old and tested controls for this new and different environment? In his session at @ThingsExpo, New York's at the Javits Center, Davi Ottenheimer, EMC Senior Director of Trust, reviewed hands-on lessons with IoT devices and reveal a new risk balance you might not expect. Davi Ottenheimer, EMC Senior Director of Trust, has more than nineteen years' experience managing global security operations and assessments, including a decade of leading incident response and digital forensics. He is co-author of t...
May. 29, 2015 11:00 AM EDT Reads: 6,135
The Internet of Things is a misnomer. That implies that everything is on the Internet, and that simply should not be - especially for things that are blurring the line between medical devices that stimulate like a pacemaker and quantified self-sensors like a pedometer or pulse tracker. The mesh of things that we manage must be segmented into zones of trust for sensing data, transmitting data, receiving command and control administrative changes, and peer-to-peer mesh messaging. In his session at @ThingsExpo, Ryan Bagnulo, Solution Architect / Software Engineer at SOA Software, focused on desi...
May. 29, 2015 11:00 AM EDT Reads: 4,432
The multi-trillion economic opportunity around the "Internet of Things" (IoT) is emerging as the hottest topic for investors in 2015. As we connect the physical world with information technology, data from actions, processes and the environment can increase sales, improve efficiencies, automate daily activities and minimize risk. In his session at @ThingsExpo, Ed Maguire, Senior Analyst at CLSA Americas, will describe what is new and different about IoT, explore financial, technological and real-world impact across consumer and business use cases. Why now? Significant corporate and venture...
May. 29, 2015 10:50 AM EDT Reads: 461
Today’s enterprise is being driven by disruptive competitive and human capital requirements to provide enterprise application access through not only desktops, but also mobile devices. To retrofit existing programs across all these devices using traditional programming methods is very costly and time consuming – often prohibitively so. In his session at @ThingsExpo, Jesse Shiah, CEO, President, and Co-Founder of AgilePoint Inc., discussed how you can create applications that run on all mobile devices as well as laptops and desktops using a visual drag-and-drop application – and eForms-buildi...
May. 29, 2015 10:00 AM EDT Reads: 5,821
While great strides have been made relative to the video aspects of remote collaboration, audio technology has basically stagnated. Typically all audio is mixed to a single monaural stream and emanates from a single point, such as a speakerphone or a speaker associated with a video monitor. This leads to confusion and lack of understanding among participants especially regarding who is actually speaking. Spatial teleconferencing introduces the concept of acoustic spatial separation between conference participants in three dimensional space. This has been shown to significantly improve comprehe...
May. 29, 2015 10:00 AM EDT Reads: 3,650
There will be 150 billion connected devices by 2020. New digital businesses have already disrupted value chains across every industry. APIs are at the center of the digital business. You need to understand what assets you have that can be exposed digitally, what their digital value chain is, and how to create an effective business model around that value chain to compete in this economy. No enterprise can be complacent and not engage in the digital economy. Learn how to be the disruptor and not the disruptee.
May. 29, 2015 09:45 AM EDT Reads: 1,043
The enterprise market will drive IoT device adoption over the next five years. In his session at @ThingsExpo, John Greenough, an analyst at BI Intelligence, division of Business Insider, will analyze how companies will adopt IoT products and the associated cost of adopting those products. John Greenough is the lead analyst covering the Internet of Things for BI Intelligence- Business Insider’s paid research service. Numerous IoT companies have cited his analysis of the IoT. Prior to joining BI Intelligence, he worked analyzing bank technology for Corporate Insight and The Clearing House Pay...
May. 29, 2015 09:36 AM EDT Reads: 581
SYS-CON Events announced today that MetraTech, now part of Ericsson, has been named “Silver Sponsor” of SYS-CON's 16th International Cloud Expo®, which will take place on June 9–11, 2015, at the Javits Center in New York, NY. Ericsson is the driving force behind the Networked Society- a world leader in communications infrastructure, software and services. Some 40% of the world’s mobile traffic runs through networks Ericsson has supplied, serving more than 2.5 billion subscribers.
May. 29, 2015 09:00 AM EDT Reads: 2,431
With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo in Silicon Valley. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be! Internet of @ThingsExpo, taking place Nov 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 17th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The Internet of Things (IoT) is the most profound change in personal an...
May. 29, 2015 09:00 AM EDT Reads: 3,248
The Domain Name Service (DNS) is one of the most important components in networking infrastructure, enabling users and services to access applications by translating URLs (names) into IP addresses (numbers). Because every icon and URL and all embedded content on a website requires a DNS lookup loading complex sites necessitates hundreds of DNS queries. In addition, as more internet-enabled ‘Things' get connected, people will rely on DNS to name and find their fridges, toasters and toilets. According to a recent IDG Research Services Survey this rate of traffic will only grow. What's driving t...
May. 29, 2015 09:00 AM EDT Reads: 5,636
The Internet of Things promises to transform businesses (and lives), but navigating the business and technical path to success can be difficult to understand. In his session at @ThingsExpo, Sean Lorenz, Technical Product Manager for Xively at LogMeIn, demonstrated how to approach creating broadly successful connected customer solutions using real world business transformation studies including New England BioLabs and more.
May. 29, 2015 08:00 AM EDT Reads: 6,306
The world is at a tipping point where the technology, the device and global adoption are converging to such a point that we will see an explosion of a world where smartphone devices not only allow us to talk to each other, but allow for communication between everything – serving as a central hub from which we control our world – MediaTek is at the heart of both driving this and allowing the markets to drive this reality forward themselves. The next wave of consumer gadgets is here – smart, connected, and small. If your ambitions are big, so are ours. In his session at @ThingsExpo, Jack Hu, D...
May. 29, 2015 07:45 AM EDT Reads: 1,229
17th Cloud Expo, taking place Nov 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy. Meanwhile, 94% of enterprises are using some form of XaaS – software, platform, and infrastructure as a service.
May. 28, 2015 11:15 PM EDT Reads: 2,842
The recent trends like cloud computing, social, mobile and Internet of Things are forcing enterprises to modernize in order to compete in the competitive globalized markets. However, enterprises are approaching newer technologies with a more silo-ed way, gaining only sub optimal benefits. The Modern Enterprise model is presented as a newer way to think of enterprise IT, which takes a more holistic approach to embracing modern technologies.
May. 28, 2015 11:00 PM EDT Reads: 6,462
The true value of the Internet of Things (IoT) lies not just in the data, but through the services that protect the data, perform the analysis and present findings in a usable way. With many IoT elements rooted in traditional IT components, Big Data and IoT isn’t just a play for enterprise. In fact, the IoT presents SMBs with the prospect of launching entirely new activities and exploring innovative areas. CompTIA research identifies several areas where IoT is expected to have the greatest impact.
May. 28, 2015 09:00 PM EDT Reads: 5,495
There's no doubt that the Internet of Things is driving the next wave of innovation. Google has spent billions over the past few months vacuuming up companies that specialize in smart appliances and machine learning. Already, Philips light bulbs, Audi automobiles, and Samsung washers and dryers can communicate with and be controlled from mobile devices. To take advantage of the opportunities the Internet of Things brings to your business, you'll want to start preparing now.
May. 28, 2015 07:00 PM EDT Reads: 6,204
P2P RTC will impact the landscape of communications, shifting from traditional telephony style communications models to OTT (Over-The-Top) cloud assisted & PaaS (Platform as a Service) communication services. The P2P shift will impact many areas of our lives, from mobile communication, human interactive web services, RTC and telephony infrastructure, user federation, security and privacy implications, business costs, and scalability. In his session at @ThingsExpo, Robin Raymond, Chief Architect at Hookflash, will walk through the shifting landscape of traditional telephone and voice services ...
May. 28, 2015 03:00 PM EDT Reads: 4,799