|By Don MacVittie||
|January 20, 2013 10:00 AM EST||
When you purchase a high-end storage array, it is not generally advised that you half fill the racks and then forget about it, purchasing a new empty rack to fill when next you need high-end storage.
Knowing how the firmware is configured on a BIG-IP, we can chat about some of the more interesting aspects of hardware, firmware, and devices overall. One of the truly interesting bits to me is the proclivity of many organizations to purchase a high-end, bladed ADC system and not fill the rack. I remember way back in the day when my cohorts in the networking and storage (FC SAN) spaces had to worry about the backplane on a switch and how much it could actually handle compared to the sum of the ports you could put on the front. But that isn’t as much a concern with ADCs (or much of anything else these days), purpose-built devices tend to have plenty of bandwidth on the backplane, and you don’t buy an ADC based off of commoditized hardware that you expect to drop blades into.
But there are a reasonably large number of organizations that have purchased a bladed ADC and then either done nothing more with it than the original purpose, or gone out and bought separate ADCs (normally from the same vendor!) to do new tasks.
And the question there is… Are you really maximizing your infrastructure that way?
We are going through a whole cycle of storage consolidation because our storage needs were met in this manner. There was corporate storage, divisional storage, departmental storage, and in many places team storage, all growing at the same time with no oversight and lots of “we’re completely out of space” at one level while another was overflowing.
We, as an industry, need to apply the lessons learned there to our usage of ADCs. Sure, you might have purchased that blade rack for project X, but when you kick off project Y, do you really want to purchase all new hardware, or could you drop a couple of new blades into the rack and use any of the methods various vendors offer to partition off those blades as separate entities? Of course you could. And it would normally be more economically feasible. Of course there are cases where you can show going a different route might cost less, but there are some other considerations to be made. Like power consumption of a whole new device versus a blade, and management of a whole new device versus another interface on an existing device, and of course the cost of setting up and configuring a whole new device versus utilizing the configuration already in place for the other blades and modifying it.
From the F5 perspective, we have attempted to minimize the pain of an all-new configuration with iApps, a very cool feature that handles the details for you, but they won’t initially configure the device, and blades will do a lot of that configuration for you. Indeed, if you are just expanding the capacity of an existing environment, that is automatic. Only if you’re doing new things – new apps, new ADC functionality, new segmentation – do you have to do configuration. If you’re not an F5 customer, you can of course check with your vendor, but I’m willing to bet you’ll have less work putting blades into existing chassis.
And don’t forget that a modern ADC is capable of doing a lot of things. If you’re looking for new LAN/WAN/security/application delivery functionality, check into what can go into your ADC rack while you’re looking at other options. It is entirely possible that the ADC you have could perform the functionality you need, with a single (or simplified) management interface, leaving staff more time to deal with the 10 million other issues that come up in an IT shop in the course of a year. If your ADC is underutilized, it might just be possible that you could start using your ADC for the given purpose with just a license key, saving even more time, and likely some money too.
In his keynote at @ThingsExpo, Chris Matthieu, Director of IoT Engineering at Citrix and co-founder and CTO of Octoblu, focused on building an IoT platform and company. He provided a behind-the-scenes look at Octoblu’s platform, business, and pivots along the way (including the Citrix acquisition of Octoblu).
Nov. 26, 2015 09:00 AM EST Reads: 470
In his General Session at 17th Cloud Expo, Bruce Swann, Senior Product Marketing Manager for Adobe Campaign, explored the key ingredients of cross-channel marketing in a digital world. Learn how the Adobe Marketing Cloud can help marketers embrace opportunities for personalized, relevant and real-time customer engagement across offline (direct mail, point of sale, call center) and digital (email, website, SMS, mobile apps, social networks, connected objects).
Nov. 26, 2015 08:45 AM EST Reads: 260
The Internet of Everything is re-shaping technology trends–moving away from “request/response” architecture to an “always-on” Streaming Web where data is in constant motion and secure, reliable communication is an absolute necessity. As more and more THINGS go online, the challenges that developers will need to address will only increase exponentially. In his session at @ThingsExpo, Todd Greene, Founder & CEO of PubNub, exploreed the current state of IoT connectivity and review key trends and technology requirements that will drive the Internet of Things from hype to reality.
Nov. 26, 2015 06:45 AM EST Reads: 391
Two weeks ago (November 3-5), I attended the Cloud Expo Silicon Valley as a speaker, where I presented on the security and privacy due diligence requirements for cloud solutions. Cloud security is a topical issue for every CIO, CISO, and technology buyer. Decision-makers are always looking for insights on how to mitigate the security risks of implementing and using cloud solutions. Based on the presentation topics covered at the conference, as well as the general discussions heard between sessions, I wanted to share some of my observations on emerging trends. As cyber security serves as a fou...
Nov. 26, 2015 06:15 AM EST Reads: 298
Continuous processes around the development and deployment of applications are both impacted by -- and a benefit to -- the Internet of Things trend. To help better understand the relationship between DevOps and a plethora of new end-devices and data please welcome Gary Gruver, consultant, author and a former IT executive who has led many large-scale IT transformation projects, and John Jeremiah, Technology Evangelist at Hewlett Packard Enterprise (HPE), on Twitter at @j_jeremiah. The discussion is moderated by me, Dana Gardner, Principal Analyst at Interarbor Solutions.
Nov. 26, 2015 03:45 AM EST Reads: 691
Too often with compelling new technologies market participants become overly enamored with that attractiveness of the technology and neglect underlying business drivers. This tendency, what some call the “newest shiny object syndrome” is understandable given that virtually all of us are heavily engaged in technology. But it is also mistaken. Without concrete business cases driving its deployment, IoT, like many other technologies before it, will fade into obscurity.
Nov. 26, 2015 03:00 AM EST Reads: 303
With all the incredible momentum behind the Internet of Things (IoT) industry, it is easy to forget that not a single CEO wakes up and wonders if “my IoT is broken.” What they wonder is if they are making the right decisions to do all they can to increase revenue, decrease costs, and improve customer experience – effectively the same challenges they have always had in growing their business. The exciting thing about the IoT industry is now these decisions can be better, faster, and smarter. Now all corporate assets – people, objects, and spaces – can share information about themselves and thei...
Nov. 26, 2015 02:00 AM EST Reads: 187
The Internet of Things is clearly many things: data collection and analytics, wearables, Smart Grids and Smart Cities, the Industrial Internet, and more. Cool platforms like Arduino, Raspberry Pi, Intel's Galileo and Edison, and a diverse world of sensors are making the IoT a great toy box for developers in all these areas. In this Power Panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists discussed what things are the most important, which will have the most profound effect on the world, and what should we expect to see over the next couple of years.
Nov. 26, 2015 01:30 AM EST Reads: 432
Growth hacking is common for startups to make unheard-of progress in building their business. Career Hacks can help Geek Girls and those who support them (yes, that's you too, Dad!) to excel in this typically male-dominated world. Get ready to learn the facts: Is there a bias against women in the tech / developer communities? Why are women 50% of the workforce, but hold only 24% of the STEM or IT positions? Some beginnings of what to do about it! In her Day 2 Keynote at 17th Cloud Expo, Sandy Carter, IBM General Manager Cloud Ecosystem and Developers, and a Social Business Evangelist, wil...
Nov. 26, 2015 12:00 AM EST Reads: 525
PubNub has announced the release of BLOCKS, a set of customizable microservices that give developers a simple way to add code and deploy features for realtime apps.PubNub BLOCKS executes business logic directly on the data streaming through PubNub’s network without splitting it off to an intermediary server controlled by the customer. This revolutionary approach streamlines app development, reduces endpoint-to-endpoint latency, and allows apps to better leverage the enormous scalability of PubNub’s Data Stream Network.
Nov. 26, 2015 12:00 AM EST Reads: 282
Discussions of cloud computing have evolved in recent years from a focus on specific types of cloud, to a world of hybrid cloud, and to a world dominated by the APIs that make today's multi-cloud environments and hybrid clouds possible. In this Power Panel at 17th Cloud Expo, moderated by Conference Chair Roger Strukhoff, panelists addressed the importance of customers being able to use the specific technologies they need, through environments and ecosystems that expose their APIs to make true change and transformation possible.
Nov. 26, 2015 12:00 AM EST Reads: 486
Microservices are a very exciting architectural approach that many organizations are looking to as a way to accelerate innovation. Microservices promise to allow teams to move away from monolithic "ball of mud" systems, but the reality is that, in the vast majority of organizations, different projects and technologies will continue to be developed at different speeds. How to handle the dependencies between these disparate systems with different iteration cycles? Consider the "canoncial problem" in this scenario: microservice A (releases daily) depends on a couple of additions to backend B (re...
Nov. 25, 2015 10:00 PM EST Reads: 394
I recently attended and was a speaker at the 4th International Internet of @ThingsExpo at the Santa Clara Convention Center. I also had the opportunity to attend this event last year and I wrote a blog from that show talking about how the “Enterprise Impact of IoT” was a key theme of last year’s show. I was curious to see if the same theme would still resonate 365 days later and what, if any, changes I would see in the content presented.
Nov. 25, 2015 09:00 PM EST Reads: 368
Apps and devices shouldn't stop working when there's limited or no network connectivity. Learn how to bring data stored in a cloud database to the edge of the network (and back again) whenever an Internet connection is available. In his session at 17th Cloud Expo, Ben Perlmutter, a Sales Engineer with IBM Cloudant, demonstrated techniques for replicating cloud databases with devices in order to build offline-first mobile or Internet of Things (IoT) apps that can provide a better, faster user experience, both offline and online. The focus of this talk was on IBM Cloudant, Apache CouchDB, and ...
Nov. 25, 2015 08:30 PM EST Reads: 368
Container technology is shaping the future of DevOps and it’s also changing the way organizations think about application development. With the rise of mobile applications in the enterprise, businesses are abandoning year-long development cycles and embracing technologies that enable rapid development and continuous deployment of apps. In his session at DevOps Summit, Kurt Collins, Developer Evangelist at Built.io, examined how Docker has evolved into a highly effective tool for application delivery by allowing increasingly popular Mobile Backend-as-a-Service (mBaaS) platforms to quickly crea...
Nov. 25, 2015 05:00 PM EST Reads: 302
With major technology companies and startups seriously embracing IoT strategies, now is the perfect time to attend @ThingsExpo 2016 in New York and Silicon Valley. Learn what is going on, contribute to the discussions, and ensure that your enterprise is as "IoT-Ready" as it can be! Internet of @ThingsExpo, taking place Nov 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 17th Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The Internet of Things (IoT) is the most profound cha...
Nov. 25, 2015 02:45 PM EST Reads: 500
Internet of @ThingsExpo, taking place June 7-9, 2016 at Javits Center, New York City and Nov 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with the 18th International @CloudExpo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world and ThingsExpo New York Call for Papers is now open.
Nov. 25, 2015 02:30 PM EST Reads: 509
The cloud. Like a comic book superhero, there seems to be no problem it can’t fix or cost it can’t slash. Yet making the transition is not always easy and production environments are still largely on premise. Taking some practical and sensible steps to reduce risk can also help provide a basis for a successful cloud transition. A plethora of surveys from the likes of IDG and Gartner show that more than 70 percent of enterprises have deployed at least one or more cloud application or workload. Yet a closer inspection at the data reveals less than half of these cloud projects involve production...
Nov. 25, 2015 02:15 PM EST Reads: 426
Cloud computing delivers on-demand resources that provide businesses with flexibility and cost-savings. The challenge in moving workloads to the cloud has been the cost and complexity of ensuring the initial and ongoing security and regulatory (PCI, HIPAA, FFIEC) compliance across private and public clouds. Manual security compliance is slow, prone to human error, and represents over 50% of the cost of managing cloud applications. Determining how to automate cloud security compliance is critical to maintaining positive ROI. Raxak Protect is an automated security compliance SaaS platform and ma...
Nov. 25, 2015 02:00 PM EST Reads: 358
There are over 120 breakout sessions in all, with Keynotes, General Sessions, and Power Panels adding to three days of incredibly rich presentations and content. Join @ThingsExpo conference chair Roger Strukhoff (@IoT2040), June 7-9, 2016 in New York City, for three days of intense 'Internet of Things' discussion and focus, including Big Data's indespensable role in IoT, Smart Grids and Industrial Internet of Things, Wearables and Consumer IoT, as well as (new) IoT's use in Vertical Markets.
Nov. 25, 2015 12:00 PM EST Reads: 525