|By Maureen O'Gara||
|January 21, 2013 08:00 AM EST||
Um, something happened this week you ought to know about.
Facebook blew up the traditional monolithic server - and lit charges under the entire $55 billion-a-year server industry.
GigaOm was first to say it that way and it may turn out to be true so it bears repeating.
Facebook, along with its user-leaning Open Compute contingent, is bent on redesigning servers to suit themselves using interchangeable, disaggregated, independently upgradeable parts.
Ultimately it's supposed to free the customer from the tyranny of the vendor roadmap.
To advance this crusade, Facebook released a Common Slot architecture specification for data center motherboards at the Open Compute Summit Wednesday.
The thing is nicknamed "Group Hug" and it's supposed to produce boards that are completely vendor-neutral and last through multiple generations of processors from multiple vendors.
Having been born too late to exert any influence over server blades, Facebook is determined to see that the new microserver architectures conform to some sort of compatibility code.
Intel, AMD, Applied Micro and Calxeda are already committed to producing products designed to the Common Slot spec and Calxeda, the little Texas start-up with the ARM microserver designs, is so pleased to be in this rarified company it's beside itself.
The way things are unfolding it looks like Facebook and the Open Compute Project (OPC) are endorsing microservers built out of the mobile chips used in smartphones and tablets, giving ARM a chance to break into the citadel held fast by the x86.
Frank Frankovsky, Facebook's VP of hardware design and supply chain as well as executive director of the Open Compute Foundation, showed off a Group Hug board with five unreleased Intel x86 Avoton S Series Atom chips on it as well as five X-Gene 64-bit ARM SoCs.
They all share the same power, electrical and mechanical interconnects and slide into the same microserver chassis.
The chips are on cards that are inserted into the so-called common slot. The motherboard can currently accommodate 10 cards.
"We're establishing for the first time a common slot for any SoC maker to design to a common standard," Frankovsky said. "All the surrounding bits are the same, with DDR memory and network controllers, and now for the first time we will have the ability to have a common slot architecture."
It uses a simple PCIe x8 connector to link the SoCs to the board.
"If we had left this to the industry they probably would have gone out and found the most expensive and esoteric connector on the planet," he said. "What we decided to do was use a PCI-e x8 connector and simply change the pin-out." The Facebook backplane design has one PCI pin-out per server.
The board's layout isn't etched in stone either. It's just supposed to encourage people to use the common slot for their CPUs. "We will now not be bound by placement of components on a single monolithic motherboard," Frankovsky said. "We will be able to do smarter tech refreshes."
The object of the game is to make hardware that's cheaper, greener, more upgradeable and software-defined so it fits the workload and less power hungry.
Group Hug envisions abandoning the modern vendor-integrated server that has to be switched out generation-to-generation for components that can be upgraded as they become available without scraping what surrounds them, letting customers design modular, custom, scalable servers with just the right compute, storage and networking for the job.
The growing consensus is you shouldn't have to change the whole system just to refresh processors, memory or I/O.
The concept and the movement building behind it obviously threaten IBM, HP, Dell and probably VMware too, since Facebook doesn't much fancy virtualization as a way to drive hardware utilization.
Intel, on the other hand, is on the movement's board and is contributing designs for its forthcoming silicon photonics technology, which will enable 100 Gbps interconnects, enough bandwidth to serve multiple processor generations.
Frankovsky said, "This technology also has such low latency that we can take components that previously needed to be bound to the same motherboard and begin to spread them out within a rack."
"We'll said be able to do things in the data center that we've never been able to do before," Intel CTO Justin Rattner said.
It's supposed to connect servers together using a laser-base technology created using silicon rather than pricier techniques.
The increasing popularity of the Internet of Things necessitates that our physical and cognitive relationship with wearable technology will change rapidly in the near future. This advent means logging has become a thing of the past. Before, it was on us to track our own data, but now that data is automatically available. What does this mean for mHealth and the "connected" body? In her session at @ThingsExpo, Lisa Calkins, CEO and co-founder of Amadeus Consulting, will discuss the impact of wea...
May. 3, 2016 08:00 PM EDT Reads: 1,006
Increasing IoT connectivity is forcing enterprises to find elegant solutions to organize and visualize all incoming data from these connected devices with re-configurable dashboard widgets to effectively allow rapid decision-making for everything from immediate actions in tactical situations to strategic analysis and reporting. In his session at 18th Cloud Expo, Shikhir Singh, Senior Developer Relations Manager at Sencha, will discuss how to create HTML5 dashboards that interact with IoT devic...
May. 3, 2016 08:00 PM EDT Reads: 1,290
There is an ever-growing explosion of new devices that are connected to the Internet using “cloud” solutions. This rapid growth is creating a massive new demand for efficient access to data. And it’s not just about connecting to that data anymore. This new demand is bringing new issues and challenges and it is important for companies to scale for the coming growth. And with that scaling comes the need for greater security, gathering and data analysis, storage, connectivity and, of course, the...
May. 3, 2016 07:15 PM EDT Reads: 1,075
Manufacturers are embracing the Industrial Internet the same way consumers are leveraging Fitbits – to improve overall health and wellness. Both can provide consistent measurement, visibility, and suggest performance improvements customized to help reach goals. Fitbit users can view real-time data and make adjustments to increase their activity. In his session at @ThingsExpo, Mark Bernardo Professional Services Leader, Americas, at GE Digital, will discuss how leveraging the Industrial Interne...
May. 3, 2016 06:45 PM EDT Reads: 1,187
SYS-CON Events announced today that Ericsson has been named “Gold Sponsor” of SYS-CON's @ThingsExpo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. Ericsson is a world leader in the rapidly changing environment of communications technology – providing equipment, software and services to enable transformation through mobility. Some 40 percent of global mobile traffic runs through networks we have supplied. More than 1 billion subscribers around the world re...
May. 3, 2016 06:30 PM EDT Reads: 1,253
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
May. 3, 2016 06:30 PM EDT Reads: 699
The IETF draft standard for M2M certificates is a security solution specifically designed for the demanding needs of IoT/M2M applications. In his session at @ThingsExpo, Brian Romansky, VP of Strategic Technology at TrustPoint Innovation, will explain how M2M certificates can efficiently enable confidentiality, integrity, and authenticity on highly constrained devices.
May. 3, 2016 06:30 PM EDT Reads: 1,123
We're entering the post-smartphone era, where wearable gadgets from watches and fitness bands to glasses and health aids will power the next technological revolution. With mass adoption of wearable devices comes a new data ecosystem that must be protected. Wearables open new pathways that facilitate the tracking, sharing and storing of consumers’ personal health, location and daily activity data. Consumers have some idea of the data these devices capture, but most don’t realize how revealing and...
May. 3, 2016 05:45 PM EDT Reads: 253
trust and privacy in their ecosystem. Assurance and protection of device identity, secure data encryption and authentication are the key security challenges organizations are trying to address when integrating IoT devices. This holds true for IoT applications in a wide range of industries, for example, healthcare, consumer devices, and manufacturing. In his session at @ThingsExpo, Lancen LaChance, vice president of product management, IoT solutions at GlobalSign, will teach IoT developers how t...
May. 3, 2016 05:00 PM EDT Reads: 251
A critical component of any IoT project is the back-end systems that capture data from remote IoT devices and structure it in a way to answer useful questions. Traditional data warehouse and analytical systems are mature technologies that can be used to handle large data sets, but they are not well suited to many IoT-scale products and the need for real-time insights. At Fuze, we have developed a backend platform as part of our mobility-oriented cloud service that uses Big Data-based approache...
May. 3, 2016 04:15 PM EDT Reads: 262
We’ve worked with dozens of early adopters across numerous industries and will debunk common misperceptions, which starts with understanding that many of the connected products we’ll use over the next 5 years are already products, they’re just not yet connected. With an IoT product, time-in-market provides much more essential feedback than ever before. Innovation comes from what you do with the data that the connected product provides in order to enhance the customer experience and optimize busi...
May. 3, 2016 03:30 PM EDT Reads: 1,174
Artificial Intelligence has the potential to massively disrupt IoT. In his session at 18th Cloud Expo, AJ Abdallat, CEO of Beyond AI, will discuss what the five main drivers are in Artificial Intelligence that could shape the future of the Internet of Things. AJ Abdallat is CEO of Beyond AI. He has over 20 years of management experience in the fields of artificial intelligence, sensors, instruments, devices and software for telecommunications, life sciences, environmental monitoring, process...
May. 3, 2016 03:15 PM EDT Reads: 1,170
In his session at @ThingsExpo, Chris Klein, CEO and Co-founder of Rachio, will discuss next generation communities that are using IoT to create more sustainable, intelligent communities. One example is Sterling Ranch, a 10,000 home development that – with the help of Siemens – will integrate IoT technology into the community to provide residents with energy and water savings as well as intelligent security. Everything from stop lights to sprinkler systems to building infrastructures will run ef...
May. 3, 2016 03:15 PM EDT Reads: 1,156
Digital payments using wearable devices such as smart watches, fitness trackers, and payment wristbands are an increasing area of focus for industry participants, and consumer acceptance from early trials and deployments has encouraged some of the biggest names in technology and banking to continue their push to drive growth in this nascent market. Wearable payment systems may utilize near field communication (NFC), radio frequency identification (RFID), or quick response (QR) codes and barcodes...
May. 3, 2016 02:30 PM EDT Reads: 939
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
May. 3, 2016 12:30 PM EDT Reads: 1,162
You deployed your app with the Bluemix PaaS and it's gaining some serious traction, so it's time to make some tweaks. Did you design your application in a way that it can scale in the cloud? Were you even thinking about the cloud when you built the app? If not, chances are your app is going to break. Check out this webcast to learn various techniques for designing applications that will scale successfully in Bluemix, for the confidence you need to take your apps to the next level and beyond.
May. 3, 2016 12:15 PM EDT Reads: 1,585
SYS-CON Events announced today that Peak 10, Inc., a national IT infrastructure and cloud services provider, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Peak 10 provides reliable, tailored data center and network services, cloud and managed services. Its solutions are designed to scale and adapt to customers’ changing business needs, enabling them to lower costs, improve performance and focus inter...
May. 3, 2016 12:00 PM EDT Reads: 1,358
So, you bought into the current machine learning craze and went on to collect millions/billions of records from this promising new data source. Now, what do you do with them? Too often, the abundance of data quickly turns into an abundance of problems. How do you extract that "magic essence" from your data without falling into the common pitfalls? In her session at @ThingsExpo, Natalia Ponomareva, Software Engineer at Google, will provide tips on how to be successful in large scale machine lear...
May. 3, 2016 09:45 AM EDT Reads: 1,436
You think you know what’s in your data. But do you? Most organizations are now aware of the business intelligence represented by their data. Data science stands to take this to a level you never thought of – literally. The techniques of data science, when used with the capabilities of Big Data technologies, can make connections you had not yet imagined, helping you discover new insights and ask new questions of your data. In his session at @ThingsExpo, Sarbjit Sarkaria, data science team lead ...
May. 3, 2016 07:00 AM EDT Reads: 1,090
SYS-CON Events announced today that Fusion, a leading provider of cloud services, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Fusion, a leading provider of integrated cloud solutions to small, medium and large businesses, is the industry's single source for the cloud. Fusion's advanced, proprietary cloud service platform enables the integration of leading edge solutions in the cloud, including cloud...
May. 2, 2016 10:00 AM EDT Reads: 2,686